CAPSTONE C30

La turbina a gas oil-free da 30 kWe

La turbina Capstone C30 da 30kWe rappresenta il turbogeneratore oil-free più evoluto al mondo per l’autogenerazione ad alta efficienza di energia elettrica e termica.

NATURAL GAS

Robust power system achieves ultra-low emissions and reliable electricity from natural gas.

  • Ultra-low emissions
  • One moving part – minimal maintenance and downtime
  • Patented air bearings – no lubricating oil or coolant
  • 5 and 9 year Factory Protection Plans available
  • Remote monitoring and diagnostic capabilities
  • Integrated utility synchronization and protection(1)
  • Small, modular design allows for easy, low-cost installation
  • Reliable – tens of millions of run hours and counting

  • Electrical Power Output: 65kW
  • Voltage: 400/480 VAC
  • Electrical Service: 3-Phase, 4 Wire Wye
  • Frequency: 50/60 Hz
  • Electrical Efficiency LHV: 29%
  • Natural Gas HHV: 30.7– 47.5 MJ/m3 (825–1,275 BTU/scf)
  • Inlet Pressure: 517– 551 kPa gauge (75– 80 psig)
  • Fuel Flow HHV: 888 MJ/hr (842,000 BTU/hr)
  • Net Heat Rate LHV: 12.4 MJ/kWh (11,800 BTU/kWh)
  • NOx Emissions @ 15% O2: < 9 ppmvd (19 mg/m3 )
  • Exhaust Mass Flow: 0.49 kg/s (1.08 lbm/s)
  • Exhaust Gas Temperature: 309°C (588°F)
  • Width x Depth x Height(3): 0.76 x 1.5 x 1.8 m (30 x 60 x 70 in)
  • Weight – Grid Connect Model: 405 kg (891 lb)
  • Weight – Dual Mode Model: 578 kg (1,271 lb)
  • Vertical Clearance: 0.61 m (24 in)
  • Horizontal Clearance
    • Left & Right: 0.76 m (24 in)
    • Front – Grid Connect Model: 0.76 m (30 in)
    • Front – Dual Mode Model: 0.93 m (37 in)
    • Rear: 0.92 m (36 in)

Acoustic Emissions at Full Load Power

Nominal at 10 m (33 ft): 65 dBA

  • Certified to UL 2200 for stand alone natural gas operation (UL files AU2687, E209370)
  • Materials Equipment Acceptance (MEA) approval for New York City
  • Models available with optional equipment for CE Marking

CASI STUDIO

Gli impianti con Capstone C30