CAPSTONE C65 ICHP

The 65kWe oil-free gas turbine with heat recovery module

The Capstone C65 65kWe turbine is the world’s most advanced oil-free turbogenerator with integrated heat recovery module (HRM) for high-efficiency self-generation of electricity and heat.

HIGH-PRESSURE NATURAL GAS, ICHP

Achieve ultra-low emissions and reliable electrical/thermal generation from natural gas

  • Ultra-low emissions
  • One moving part – minimal maintenance and downtime
  • Patented air bearings – no lubricating oil or coolant
  • Integrated utility synchronization – no external switchgear
  • Compact modular design allows for easy, low-cost installation
  • Multiple units easily combined – act as single generating source
  • Remote monitoring and diagnostic capabilities
  • Proven technology with tens of millions of operating hours
  • Various Factory Protection Plans available

  • Electrical Power Output: 65kW
  • Voltage: 400/480 VAC
  • Electrical Service: 3-Phase, 4 Wire Wye
  • Frequency: 50/60 Hz
  • Electrical Efficiency LHV: 29%
  • Natural Gas HHV: 30.7– 47.5 MJ/m3 (825–1,275 BTU/scf)
  • Inlet Pressure: 517– 551 kPa gauge (75– 80 psig)
  • Fuel Flow HHV: 888 MJ/hr (842,000 BTU/hr)
  • Net Heat Rate LHV: 12.4 MJ/kWh (11,800 BTU/kWh)
  • NOx Emissions @ 15% O2: < 9 ppmvd (19 mg/m3 )
  • Exhaust Mass Flow: 0.49 kg/s (1.08 lbm/s)
  • Exhaust Gas Temperature: 309°C (588°F) (Heat Recovery Bypassed)
  • Integrated Heat Recovery Module Type: Copper Core | Stainless Steel Core
  • Hot Water Heat Recovery: 112kW (0.38 MMBTU/hr) | 70kW (0.24 MMBTU/hr)
  • Width x Depth x Height(3): 0.76 x 2.20 x 2.36 m (30 x 87 x 93 in)
  • Weight – Grid Connect Model: 998 kg (2,200 lb)
  • Weight – Dual Mode Model: 1,364 kg (3,000 lb)

Horizontal Clearance

  • Left & Right: 0.76 m (30 in)
  • Front – Grid Connect Model: 0.76 m (30 in)
  • Front – Dual Mode Model: 1.65 m (65 in)
  • Rear: 0.76 m (30 in)

Nominal at Full Power at 10 m (33 ft): 65 dBA

  • UL 2200 Listed
  • CE Certified
  • Certified to the following grid interconnection standards: UL 1741, VDE, and BDEW
  • Compliant to California Rule 21

CASE STUDY

Implants with Capstone C65 ICHP